Fairey Christina 27
(REF# 10516)
£5,000.00
8.2m (27'0"), unknown year, 1 x diesel 48hp
GRP Construction, Planing underwater profile,
|
| Extra Details
| Designer: | |
| Builder: | Bruce Campbell/Halmatic |
| Fuel capacity: | 1 x 35 ltr (7.7 G) |
| Water capacity: | 1 x 50 ltr (11.0 G) |
| Last survey: | Unknown |
|
|
Mechanical
1 x diesel 48hp, Perkins 4108 (unknown year)
fresh-water cooled,
wheel steering,
z drive, 3 Bladed Ali prop(s).
Fuel consumption (approx) 4ltrs/hour,
Cruising speed 9 knots,
Max speed 12 knots.
Engine spares
Sale includes the engine with new control cables, Enfield leg, new filters, heater plugs, starter motor, injector pump, switch panel etc.
|
|
Electrical Systems
12 volt, 1 batteries charged by:
|
|
| Dimensions
| LOA: | 8.2m (27'0") |
| LWL: | 0.0m (0'0") |
| Beam: | 2.7m (9'0") |
| Draft Min: | 0.4m (1'2") |
| Draft Max: | 0.6m (2'0") |
| Displacement: | 3,000kg (6,615.0lbs) |
| Headroom: | 1.8m (5'11") |
|
| Construction
GRP Construction with Planing underwater profile, gelcoat finish.
The boat is being sold as a project. All GRP construction with deck and wheelhouse all in sound condition. Nothing fitted yet, but there comes as part of the sale a variety of brand new parts purchased in advance of the restoration. For example:- 2 X made to measure fuel and water tranks, hot water calorifier, stainless handles, fairleads, T post, deck fillers, wiper motors, sea cocks, pushpit, pulpit, destroyer wheel, stanchions and cables. |
| Rig
|
| Sails
|
| Accommodation
Pressurised water system
Hot water system
No accomodation is fitted, but sale includes brand new Jabsco heads, cabin heater, cabin vents, stainless sink, after deck shower kit, captain and pilot seats. |
|
| Nav Equipment
Compass, Navigation lights |
| Deck Gear
0 anchors,
0 metres of chain,
Cockpit cover |
| Fishing
|
|
| Toys
|
| Safety Equipment
Boarding ladder, 1 bilge pumps (0 manual / 1 electric) |
| Lying
WEST WALES |
| Broker's Comments
A stripped down and sound hull which is ready for someone to start their dream project. A good amount of useful parts are included in the sale. It is not a small undertaking to fit her out, but she will be a fine craft if done right. She is priced at well below what even a basic moulded hull alone would cost, even without all the new parts. This boat has been viewed and photographed by Mike de Graaf of Boatshed Wales. Register or log in to see 28 more photos of this boat. These boat details are subject to contract.
Note: Offers on the asking price may be considered.
|
|
